Differences
This shows you the differences between two versions of the page.
| Next revision | Previous revision Next revisionBoth sides next revision | ||
| manuals:usi [2016/04/23 17:49] – created mrkva | manuals:usi [2016/08/10 17:08] – mrkva | ||
|---|---|---|---|
| Line 1: | Line 1: | ||
| - | You need a recorder or a sound card with plug-in power input. Usually this is represented by "mic in" mini-jack input. | + | |
| - | - Plug Uši into the “mic in” input of the device. Make sure that plug-in power is on. | + | ====== Uši user manual ====== |
| + | {{ : | ||
| + | |||
| + | ==== How to use Uši ==== | ||
| + | You will need a recorder or a sound card with plug-in power input. Usually this is represented by "mic in" mini-jack input. | ||
| + | - Plug Uši into your recorders | ||
| + | - Make sure that __plug-in power is on__. | ||
| - On some recorders this needs to be set up using internal menus. Consult the recorders manual if you’re not sure. | - On some recorders this needs to be set up using internal menus. Consult the recorders manual if you’re not sure. | ||
| - Set your gain to appropriate levels and enjoy! | - Set your gain to appropriate levels and enjoy! | ||
| + | |||
| + | [[https:// | ||
| + | |||
| + | ====Technical specifications==== | ||
| + | |||
| + | ^ **Matched stereo pair of pre-polarized condenser microphones** ^ | ||
| + | ^ **Cable** | ||
| + | ^ **Impedance** | 2.4 kΩ at 1kHz | | ||
| + | ^ **Maximum input pressure level** | ~122 dB SPL | | ||
| + | ^ **Sensitivity** | -28 dB at 1kHz (±3 dB) | | ||
| + | ^ **Self-noise** | 14–17 dBA | | ||