Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Last revisionBoth sides next revision
manuals:usi [2016/08/10 17:08] – [Technical specifications] mrkvamanuals:usi [2020/01/17 14:38] mrkva
Line 1: Line 1:
  ~~NOTOC~~  ~~NOTOC~~
-====== Uši user manual ====== +====== (mikro)Uši ====== 
-{{ :manuals:usi_web.jpg?400|}}+{{ :manuals:mikrousi.jpg?300|}} 
 +{{ :manuals:usi.jpg?300|}}
  
-==== How to use Uši ====+==== How to use (mikro)Uši ====
 You will need a recorder or a sound card with plug-in power input. Usually this is represented by "mic in" mini-jack input. You will need a recorder or a sound card with plug-in power input. Usually this is represented by "mic in" mini-jack input.
-  - Plug Uši into your recorders “mic in”.+  - Plug (mikro)Uši into your recorders “mic in”.
   - Make sure that __plug-in power is on__.   - Make sure that __plug-in power is on__.
   - On some recorders this needs to be set up using internal menus. Consult the recorders manual if you’re not sure.   - On some recorders this needs to be set up using internal menus. Consult the recorders manual if you’re not sure.
   - Set your gain to appropriate levels and enjoy!   - Set your gain to appropriate levels and enjoy!
  
-[[https://www.youtube.com/watch?v=4VlwUs4WB-s|How to attach clips to Uši microphones]] +[[tips:usi|How to mount (mikro) Uši (Pro)]]
- +
-====Technical specifications==== +
- +
-^ **Matched stereo pair of pre-polarized condenser microphones** ^ +
-^ **Cable**     | 1.5 m (for each mic) with 3.5 mm (1/8″) jack | +
-^ **Impedance** | 2.4 kΩ at 1kHz | +
-^ **Maximum input pressure level** | ~122 dB SPL | +
-^ **Sensitivity** | -28 dB at 1kHz (±3 dB) | +
-^ **Self-noise** | 14–17 dBA |+