Differences

This shows you the differences between two versions of the page.

--- research:mixpre_knob [2018/03/15 13:08] – mrkva
+++ research:mixpre_knob [2022/11/24 12:13] – mrkva
@@ Line 1: / Line 1: @@
 ====== Sound Devices MixPre knob ======
-{{https://i.imgur.com/O1p3JsF.jpg?400|}}\\
+{{https://cdn.shopify.com/s/files/1/2504/1982/products/mixpreknobs_2048x2048.jpg?400|}}\\
-**Specs**: 12mm diamater, 12mm height\\
+**Specs**: 12 mm diamater, 10.5 mm height, 8.5 mm internal diameter\\
-[[https://www.dropbox.com/s/v9cyjdnjk9ceh56/mixpre_knob_v1.stl?dl=1|Download version 1.0 (*.stl)]]\\
+The knob is friction-fitted on the original knob, no need to modify your device. Compatible with MixPre 3, 6, 10T and 10M.\\
-<WRAP left important 60%>
+[[https://www.dropbox.com/s/4xp44v5ls869f85/mixpre_knob_v1_1%20%2810t%29.stl?dl=0|Download version 1.2 (*.stl)]] • [[https://lom-label.myshopify.com/products/mixpre-knob|Get one from us]]\\
-Extending the knob increases risk of damaging the original encoder when dropped, since the knob is protruding over the edge of the protective corners.
+<WRAP important 60%>
+Extending the knob increases risk of damaging the original encoder when dropped, since the knob is protruding over the edge of the protective corners. Use at your own discretion.
 </WRAP>
+===== Old versions =====
+[[https://www.dropbox.com/s/v9cyjdnjk9ceh56/mixpre_knob_v1.stl?dl=1|Download version 1.0 (*.stl)]] ([[https://i.imgur.com/O1p3JsF.jpg|picture of this old version]])\\