Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
research:mixpre_knob [2018/10/06 17:57]
mrkva [Sound Devices MixPre knob]
research:mixpre_knob [2019/01/22 12:02] (current)
mrkva [Sound Devices MixPre knob]
Line 2: Line 2:
 {{https://​i.imgur.com/​z9LBepr.jpg?​400|}}\\ {{https://​i.imgur.com/​z9LBepr.jpg?​400|}}\\
 **Specs**: 12mm diamater, 14mm height, 8.5mm internal diameter\\ **Specs**: 12mm diamater, 14mm height, 8.5mm internal diameter\\
-The knob is friction-fitted on the original knob, no need to modify your device.\\ +The knob is friction-fitted on the original knob, no need to modify your device. ​Compatible ​with MixPre 3, 6, 10T and 10M.\\ 
-The current design *does not* work with 10T and 10M. +[[https://​www.dropbox.com/​s/​4xp44v5ls869f85/​mixpre_knob_v1_1%20%2810t%29.stl?dl=0|Download version 1.(*.stl)]] • [[https://​lom-label.myshopify.com/​products/​mixpre-knob|Get one from us]]\\ ​
-[[https://​www.dropbox.com/​s/​pbazln13lcgkcv4/​mixpre_knob_v1_1.stl?​dl=1|Download version 1.(*.stl)]] • [[https://​lom-label.myshopify.com/​products/​mixpre-knob|Get one from us]]\\ ​+
 <WRAP important 60%> <WRAP important 60%>
 Extending the knob increases risk of damaging the original encoder when dropped, since the knob is protruding over the edge of the protective corners. Use at your own discretion. Extending the knob increases risk of damaging the original encoder when dropped, since the knob is protruding over the edge of the protective corners. Use at your own discretion.