Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Next revisionBoth sides next revision
manuals:uchopro [2017/09/06 12:13] mrkvamanuals:uchopro [2018/11/05 13:18] mrkva
Line 1: Line 1:
  ~~NOTOC~~  ~~NOTOC~~
-====== Ucho Pro ======+====== (mikro)Ucho Pro ======
  
 {{ :manuals:uchopro-1024x1024.jpg?300|}} {{ :manuals:uchopro-1024x1024.jpg?300|}}
-==== How to use Ucho Pro ==== +==== How to use (mikro)Ucho Pro ==== 
-  - Plug Ucho Pro into the XLR inputs on your device. +  - Plug (mikro)Ucho Pro into the XLR inputs on your device. 
   - Turn on the phantom power. On some devices phantom power needs to be turned on via button or menu option. Consult the manual if you’re not sure how to do it.   - Turn on the phantom power. On some devices phantom power needs to be turned on via button or menu option. Consult the manual if you’re not sure how to do it.
   - Set your gain to appropriate level and enjoy!   - Set your gain to appropriate level and enjoy!
  
-[[https://www.youtube.com/watch?v=4VlwUs4WB-s|How to attach clips to Uši microphones]] +[[https://www.youtube.com/watch?v=4VlwUs4WB-s|How to attach clips to Uši microphones (old version of the clip)]]
- +
-====Technical specifications==== +
-^ **Phantom powered, pre-polarized condenser microphone** ^ +
-^ **Operating voltage** | 24-48V ^ +
-^ **Cable** | 1.5 m with 2.5 mm diameter ^ +
-^ **Maximum input pressure level** | ~122 dB SPL ^ +
-^ **Sensitivity** | -28 dB at 1kHz (±3 dB+
-^ **Self-noise** | ~14 dBA ^ +
-^ **Output** | XLR-3M balanced, transformer-less, floating ^ +
-^ **Output impedance** | 30-50 Ω ^ +
-^ **Power consumption** | ~3mA per pin ^+