This is an old revision of the document!
Ucho Pro
How to use Ucho Pro
- Plug Ucho Pro into the XLR inputs on your device.
- Turn on the phantom power. On some devices phantom power needs to be turned on via button or menu option. Consult the manual if you’re not sure how to do it.
- Set your gain to appropriate level and enjoy!
Technical specifications
Phantom powered, matched stereo pair of pre-polarized condenser microphones | |
---|---|
Cable | 1.5 m (for each mic) with XLR connector |
Maximum input pressure level | ~122 dB SPL |
Sensitivity | -28 dB at 1kHz (±3 dB) |
Self-noise | ~14 dBA |