Differences

This shows you the differences between two versions of the page.

--- manuals:uchopro [2017/08/18 14:40] – created mrkva
+++ manuals:uchopro [2020/02/01 20:26] (current) – mrkva
@@ Line 1: / Line 1: @@
  ~~NOTOC~~
-====== Ucho Pro ======
+====== (mikro)Ucho Pro ======
-{{ :manuals:usi_pro_web.jpg?300|}}
+{{ :manuals:mikroucho_pro.jpg?300|}}
-==== How to use Ucho Pro ====
+{{ :manuals:ucho_pro.jpg?300|}}
-  - Plug Ucho Pro into the XLR inputs on your device.
-  - Turn on the phantom power. On some devices phantom power needs to be turned on via button or menu option. Consult the manual if you’re not sure how to do it.
-  - Set your gain to appropriate level and enjoy!
-[[https://www.youtube.com/watch?v=4VlwUs4WB-s|How to attach clips to Uši microphones]]
+==== How to use (mikro)Ucho Pro ====
+  - Plug (mikro)Ucho Pro into the XLR inputs on your device.
+  - Turn on the phantom power. On some devices, phantom power needs to be turned on via button or menu option. Consult the manual if you’re not sure how to do it.
+  - Set your gain to the appropriate level and enjoy!
-====Technical specifications====
+[[tips:usi|How to mount (mikro) Uši (Pro)]]
-^ **Phantom powered, matched stereo pair of pre-polarized condenser microphones** ^
-^ **Cable**     | 1.5 m (for each mic) with XLR connector |
+<WRAP center round important 60%>
-^ **Maximum input pressure level** | ~122 dB SPL |
+Using Uši with third-party cables is not covered under warranty. Uši XLR cables contain special circuitry to adjust phantom voltage for plug-in power voltage.
-^ **Sensitivity** | -28 dB at 1kHz (±3 dB) |
+</WRAP>
-^ **Self-noise** | ~14 dBA |