Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
manuals:uchopro [2017/09/06 12:13] – [Technical specifications] mrkvamanuals:uchopro [2020/02/01 20:26] (current) mrkva
Line 1: Line 1:
  ~~NOTOC~~  ~~NOTOC~~
-====== Ucho Pro ======+====== (mikro)Ucho Pro ======
  
-{{ :manuals:usi_pro_web.jpg?300|}} +{{ :manuals:mikroucho_pro.jpg?300|}} 
-==== How to use Ucho Pro ==== +{{ :manuals:ucho_pro.jpg?300|}}
-  - Plug Ucho Pro into the XLR inputs on your device +
-  - Turn on the phantom power. On some devices phantom power needs to be turned on via button or menu option. Consult the manual if you’re not sure how to do it. +
-  - Set your gain to appropriate level and enjoy!+
  
-[[https://www.youtube.com/watch?v=4VlwUs4WB-s|How to attach clips to Uši microphones]]+==== How to use (mikro)Ucho Pro ==== 
 +  - Plug (mikro)Ucho Pro into the XLR inputs on your device.  
 +  - Turn on the phantom power. On some devices, phantom power needs to be turned on via button or menu option. Consult the manual if you’re not sure how to do it. 
 +  - Set your gain to the appropriate level and enjoy!
  
-====Technical specifications==== +[[tips:usi|How to mount (mikro) Uši (Pro)]] 
-^ **Phantom powered, pre-polarized condenser microphone** ^ + 
-^ **Operating voltage** | 24-48V ^ +<WRAP center round important 60%> 
-^ **Cable** | 1.5 m with 2.5 mm diameter ^ +Using Uši with third-party cables is not covered under warrantyUši XLR cables contain special circuitry to adjust phantom voltage for plug-in power voltage. 
-^ **Maximum input pressure level** | ~122 dB SPL ^ +</WRAP>
-^ **Sensitivity** | -28 dB at 1kHz (±3 dB) ^ +
-^ **Self-noise** | ~14 dBA ^ +
-^ **Output** | XLR-3M balanced, transformer-less, floating ^ +
-^ **Output impedance** | 30-50 Ω ^ +
-^ **Power consumption** | ~3mA per pin ^+