Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revisionBoth sides next revision
manuals:usi [2016/08/11 01:27] – mrkvamanuals:usi [2018/11/05 13:16] – mrkva
Line 1: Line 1:
  ~~NOTOC~~  ~~NOTOC~~
-====== Uši ======+====== (mikro)Uši ======
 {{ :manuals:usi_web.jpg?300|}} {{ :manuals:usi_web.jpg?300|}}
  
-==== How to use Uši ====+==== How to use (mikro)Uši ====
 You will need a recorder or a sound card with plug-in power input. Usually this is represented by "mic in" mini-jack input. You will need a recorder or a sound card with plug-in power input. Usually this is represented by "mic in" mini-jack input.
-  - Plug Uši into your recorders “mic in”.+  - Plug (mikro)Uši into your recorders “mic in”.
   - Make sure that __plug-in power is on__.   - Make sure that __plug-in power is on__.
   - On some recorders this needs to be set up using internal menus. Consult the recorders manual if you’re not sure.   - On some recorders this needs to be set up using internal menus. Consult the recorders manual if you’re not sure.
   - Set your gain to appropriate levels and enjoy!   - Set your gain to appropriate levels and enjoy!
  
-[[https://www.youtube.com/watch?v=4VlwUs4WB-s|How to attach clips to Uši microphones]]+[[https://www.youtube.com/watch?v=4VlwUs4WB-s|How to attach clips to Uši microphones (old version of clips)]]
  
-====Technical specifications==== 
-^ **Matched stereo pair of pre-polarized condenser microphones** ^ 
-^ **Cable**     | 1.5 m (for each mic) with 3.5 mm (1/8″) jack | 
-^ **Impedance** | 2.4 kΩ at 1kHz | 
-^ **Maximum input pressure level** | ~122 dB SPL | 
-^ **Sensitivity** | -28 dB at 1kHz (±3 dB) | 
-^ **Self-noise** | 14–17 dBA |