Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
manuals:usi [2016/08/11 01:27] mrkvamanuals:usi [2020/02/01 20:25] (current) mrkva
Line 1: Line 1:
  ~~NOTOC~~  ~~NOTOC~~
-====== Uši ====== +====== (mikro)Uši ====== 
-{{ :manuals:usi_web.jpg?300|}}+{{ :manuals:mikrousi.jpg?300|}} 
 +{{ :manuals:usi.jpg?300|}}
  
-==== How to use Uši ====+==== How to use (mikro)Uši ====
 You will need a recorder or a sound card with plug-in power input. Usually this is represented by "mic in" mini-jack input. You will need a recorder or a sound card with plug-in power input. Usually this is represented by "mic in" mini-jack input.
-  - Plug Uši into your recorders “mic in”.+  - Plug (mikro)Uši into your recorders “mic in”.
   - Make sure that __plug-in power is on__.   - Make sure that __plug-in power is on__.
   - On some recorders this needs to be set up using internal menus. Consult the recorders manual if you’re not sure.   - On some recorders this needs to be set up using internal menus. Consult the recorders manual if you’re not sure.
   - Set your gain to appropriate levels and enjoy!   - Set your gain to appropriate levels and enjoy!
  
-[[https://www.youtube.com/watch?v=4VlwUs4WB-s|How to attach clips to Uši microphones]]+[[tips:usi|How to mount (mikro) Uši (Pro)]]
  
-====Technical specifications==== +<WRAP center round important 60%> 
-^ **Matched stereo pair of pre-polarized condenser microphones** ^ +Using Uši with third-party cables is not covered under warrantyUši XLR cables contain special circuitry to adjust phantom voltage for plug-in power voltage. 
-^ **Cable**     | 1.5 m (for each mic) with 3.5 mm (1/8″) jack | +</WRAP>
-^ **Impedance** | 2.4 kΩ at 1kHz | +
-^ **Maximum input pressure level** | ~122 dB SPL | +
-^ **Sensitivity** | -28 dB at 1kHz (±3 dB) | +
-^ **Self-noise** | 14–17 dBA |+