Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision		 Previous revision
manuals:usi [2016/08/10 16:02] – mrkvamanuals:usi [2020/02/01 20:25] (current) – mrkva
Line 1: Line 1:
-====== Uši user manual ====== + ~~NOTOC~~ 
-{{:manuals:usi_web.jpg?400 |}} +====== (mikro)Uši ====== 
-<WRAP box bggray fgblack 350px right :en> +{{ :manuals:mikrousi.jpg?300|}} 
-//**__Technical specifications__**//+{{ :manuals:usi.jpg?300|}}
  
-**Matched stereo pair of pre-polarized condenser microphones** +==== How to use (mikro)Uši ====
-  * **Cable:** 1.5 m (for each mic) with 3.5 mm (1/8″) jack +
-  * **Impedance:** 2.4 kΩ at 1kHz +
-  * **Maximum input pressure level:** ~122 dB SPL +
-  * **Sensitivity:** -28 dB at 1kHz (±3 dB) +
-  * **Self-noise:** 14–17 dBA +
-</WRAP> +
-==== How to use Uši ====+
 You will need a recorder or a sound card with plug-in power input. Usually this is represented by "mic in" mini-jack input. You will need a recorder or a sound card with plug-in power input. Usually this is represented by "mic in" mini-jack input.
-  - Plug Uši into your recorders “mic in”.+  - Plug (mikro)Uši into your recorders “mic in”.
   - Make sure that __plug-in power is on__.   - Make sure that __plug-in power is on__.
   - On some recorders this needs to be set up using internal menus. Consult the recorders manual if you’re not sure.   - On some recorders this needs to be set up using internal menus. Consult the recorders manual if you’re not sure.
   - Set your gain to appropriate levels and enjoy!   - Set your gain to appropriate levels and enjoy!
  
-[[https://www.youtube.com/watch?v=4VlwUs4WB-s|How to attach clips to Uši microphones]]+[[tips:usi|How to mount (mikro) Uši (Pro)]] 
 + 
 +<WRAP center round important 60%> 
 +Using Uši with third-party cables is not covered under warranty. Uši XLR cables contain special circuitry to adjust phantom voltage for plug-in power voltage. 
 +</WRAP>