This is an old revision of the document!
Uši user manual
How to use Uši
You will need a recorder or a sound card with plug-in power input. Usually this is represented by “mic in” mini-jack input.
- Plug Uši into your recorders “mic in”.
- Make sure that plug-in power is on.
- On some recorders this needs to be set up using internal menus. Consult the recorders manual if you’re not sure.
- Set your gain to appropriate levels and enjoy!
Technical specifications
Matched stereo pair of pre-polarized condenser microphones | |
---|---|
Cable | 1.5 m (for each mic) with 3.5 mm (1/8″) jack |
Impedance | 2.4 kΩ at 1kHz |
Maximum input pressure level | ~122 dB SPL |
Sensitivity | -28 dB at 1kHz (±3 dB) |
Self-noise | 14–17 dBA |