Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
research:mixpre_knob [2018/03/15 13:07] mrkvaresearch:mixpre_knob [2022/11/24 12:14] (current) – [Sound Devices MixPre knob] mrkva
Line 1: Line 1:
 ====== Sound Devices MixPre knob ====== ====== Sound Devices MixPre knob ======
-{{https://i.imgur.com/O1p3JsF.jpg?400|}}\\ +{{https://cdn.shopify.com/s/files/1/2504/1982/products/mixpreknobs_2048x2048.jpg?400|}}\\ 
-[[https://www.dropbox.com/s/v9cyjdnjk9ceh56/mixpre_knob_v1.stl?dl=1|Download version 1.(*.stl)]]\\ +**Specs**: 12 mm diamater, 10.5 mm height, 8.5 mm internal diameter\\ 
-<WRAP center round important 60%> +The knob is friction-fitted on the original knob, no need to modify your device. Compatible with MixPre 3, 6, 10T and 10M.\\ 
-Extending the knob increases risk of damaging the original encoder when dropped, since the knob is protruding over the edge of the protective corners.+[[https://www.dropbox.com/s/4xp44v5ls869f85/mixpre_knob_v1_2.stl?dl=0|Download version 1.(*.stl)]] • [[https://lom-label.myshopify.com/products/mixpre-knob|Get one from us]]\\  
 +<WRAP important 60%> 
 +Extending the knob increases risk of damaging the original encoder when dropped, since the knob is protruding over the edge of the protective corners. Use at your own discretion.
 </WRAP> </WRAP>
 +
 +===== Old versions =====
 +[[https://www.dropbox.com/s/v9cyjdnjk9ceh56/mixpre_knob_v1.stl?dl=1|Download version 1.0 (*.stl)]] ([[https://i.imgur.com/O1p3JsF.jpg|picture of this old version]])\\